Best Custom Cabinet Makers Near You

9,539 companies on file · 692 cities · 7,652 rated 4.5+ · 77 open 24/7 · 692 show a license

Data verified November 18, 2026

Top-rated in your area

We show companies for your area once your location is detected. Meanwhile, open an example such as Custom Cabinet Makers in Houston, TX, or browse by state.

HomeCustom Cabinet Makers

Overview: Custom Cabinet Makers

A custom cabinet shop builds to a drawing. You bring a room, a use and a style; the shop draws it, cuts and assembles the boxes and doors in its workshop, sprays the finish in a booth, then delivers and installs. That covers kitchens, and also islands, pantries, closets, laundry rooms, vanities, built-in bookcases and office walls.

This is woodworking, not a remodel. A cabinet maker is not the trade that moves a sink, reroutes a gas line or swaps in new appliances. You or your general contractor line those up around the cabinet schedule. What the shop owns is the box, the door and the fit.

Ask what the boxes are made of and how the drawer boxes are joined. Ask whether doors are sprayed in a booth or finished in your house, because a booth finish is harder and more even. Ask who takes the final site measurements, how they scribe to walls that are never straight, and how long it runs from signed drawing to install day.

Use the state and city lists below to find shops with a workshop or showroom you can walk into. Each city page shows who is listed in that city and who is nearby, and quotes local customers.

Cost of Custom Cabinets

Cabinet prices only compare fairly when the cabinet inventory and finish match. For the rate below, one linear foot includes a base cabinet and the upper cabinet above it, counted once.

Service or scopePlanning rangeWhat this covers
Custom cabinets installed$1,000–$1,600per wall-run foot, base and upper cabinets combinedCustom kitchen cabinetry priced along a wall run containing both base and upper cabinets, finished and installed; door style and hardware allowances are specified separately.Request the box-by-box schedule. A base-only run, a tall pantry or an island cannot be multiplied by this paired-run rate.
Included scope and possible extras

Scope used for this estimate: Specified cabinet boxes, fronts and finish; Ordinary installation

Outside this estimate: Countertops and appliances; Old-cabinet demolition; Handles, pulls and specialty hardware unless listed; Tall pantries, islands and specialty storage unless priced; Utility relocation

Simple painted built-in shelving, 6–8 feet wide$1,500–$5,000per installed projectA straight 6-to-8-foot-wide painted shelving built-in using ordinary paint-grade materials; specify height, depth and any enclosed storage.Obtain a drawing with width, height, depth and shelf count; wall length alone does not define the finished unit.
Included scope and possible extras

Scope used for this estimate: Fabrication and installation of the defined shelving; Ordinary painted finish

Outside this estimate: Lighting or electrical work; Stained hardwood; Complex doors, drawers or media cabinetry; Wall reconstruction

Existing cabinet refacing$4,000–$20,000per kitchen with an itemized cabinet inventoryReface sound existing kitchen cabinet boxes with new doors and drawer fronts and matching exposed-face treatment, retaining the layout.The cabinet count is essential: ask for every door, drawer front and exposed panel to be itemized before comparing totals.
Included scope and possible extras

Scope used for this estimate: Specified replacement doors and drawer fronts; Matching face-frame and exposed-end treatment; Installation and listed hardware

Outside this estimate: New cabinet boxes or layout changes; Countertops; Drawer boxes and premium organizers unless listed

What changes the price

  • Cabinet inventory, height and depth, islands, tall pantries and specialty storage.
  • Box construction, painted versus stained finish, door style and hardware grade.
  • Delivery, installation, removal and whether countertops or trade work are separate.

Ask before you book

  • Can I see the cabinet schedule and exactly how each linear foot is counted?Paired upper-and-base runs, base-only runs and tall units produce different prices per foot.
  • What are the box material, door construction, finish and hardware specifications?These details explain meaningful quality and price differences.
  • Could sound boxes be retained, and what does the total include beyond the cabinets?Refacing may fit an unchanged layout, while removal, counters and utility work can raise a replacement budget.

Check the scope

A kitchen floor area is not a cabinet quantity. Compare the same box schedule and confirm whether finish, hardware, delivery and installation are included.

Compare quotes wisely

Ask for an alternative with fewer custom inserts or standard-sized boxes while keeping the required storage layout.

How to read these estimates

These ranges combine published U.S. prices and cost guidance for the stated work. They are budgeting estimates, not offers from listed companies or a statistical national average. Confirm the total, included work and additional charges in writing.

U.S. planning estimates. Local quotes vary by location and the scope of work.

Frequently asked questions

Frameless or face frame?

A face frame cabinet carries a wood frame across the front of the box, and the doors sit over it or inside it. Frameless drops that frame, so drawer boxes come out wider and you can reach the full opening. Frameless is less forgiving of out-of-square walls and leans harder on good hardware. Both are sound. The box material and the door fit tell you more about a shop.

What should the boxes be made of?

Plywood holds screws, shrugs off a leak under the sink and carries a stone top without sagging. Particleboard and MDF sit flatter, cost less and are stable while dry, but once water reaches them they swell and stay swollen. Plenty of good shops mix the two, putting plywood where weight and water live and engineered panel elsewhere. Ask which goes where, and why.

How long does a custom order take?

Think in weeks, often months, not days. The drawing and approval take one stretch, the build queue another, and the finish and cure schedule its own. Nothing is cut until you sign the drawing, so slow decisions on doors, color and hardware move the install day back. If a shop promises to start next week, ask what is already on the bench and what is in front of you.

Is refacing worth it?

If the boxes are sound and square and the layout works, refacing gives you new doors, new drawer fronts and a skin on the end panels for far less money and mess, and it is done in days. If the layout is wrong, the particleboard has swollen or the drawers are coming apart, you are dressing up a problem. Pull out a drawer and look at the joints before you decide.

How do cabinets fit walls that are not straight?

By scribing. The installer runs a wider filler or scribe strip against the wall, marks the true shape of the wall onto it, and cuts to that line so the gap closes. The same move handles a floor that falls away and a ceiling that dips toward the crown molding. This is why installation is skilled work and why a shop wants its own crew doing it.

Browse by state

Top cities

How we build this list

No one pays to be hereNo business pays us. Nobody can buy a listing, a higher spot or a Best of award.
Checked before listedWe leave out permanently closed businesses, call centers posing as local contractors and duplicate branches.
Facts from the sourceWarranties, certifications and years in business come from each company's own website, checked against that page.
Rechecked every seasonEvery listing is checked again about every three months: open or closed, hours, phone, website, reviews.
Is this page useful? Yes
No
Is there anything wrong with this page?
Back To Top